-
This analysis is mainly for detection of possible anomalous average (median) values of barometers using height information. I.e. if the calculated height based on [barometric formula](https://en.wikip…
-
I'm trying to eliminate altitude limits on a Matrice 210. With my setup I don't need a barometer to fly -- I'd be happy if I could just cut it out of the system entirely. What settings should I be loo…
durka updated
4 years ago
-
#### Issue details
I recently installed a brand new GNSS V2 GPS, which has an onboard barometer. I immediately began getting "Bad Baro Health" messages in MP. I tried all that I could to get it corre…
-
This should be possible: https://scholar.google.com/scholar?bav=on.2,or.r_cp.&biw=1920&bih=940&um=1&ie=UTF-8&lr&cites=3938968519160815019
n8fr8 updated
6 years ago
-
I'm getting this error on the latest `master`
Any ideas? @drinkdhmo
-
I have a gazebo in which i have many sensors like imu ,gps,magnetometer and their data is published in gazebo::msgs but barometer data is not publishing in gazebo::msgs it is publishing in sensor_msg…
-
Something like:
```
// Synchronous
barometer.timer('path', function() {
thingToBeTimed();
});
// Asynchronous with callback
barometer.timer('path', function (done) {
thingToBeTimed(function() {
…
-
Currently, every one of our sensors (barometer, IMU, accelerometer, etc.) is expected to produce data updates each loop. This is reasonable for some of the sensors with a fast data rate, but for some …
-
This is sub task of https://github.com/rilling/OpenTracksConcordia/issues/180
Calibrate the barometer sensor on your Android device to ensure accurate altitude measurements.
-
takes barometer reading, latitude and longitude and outputs a 2D map (projection) that shows the 4D trajectory as it happens