-
Hi,
I'm aware there are multitude "does not work"-kind issues already reported, but I believe I'm providing enough data to improve the datasource.
I'm using version v1.0.0-beta.4 with grafana-10…
-
Idea is to have a ESPHome node with three task areas.
#### 1. Plant monitoring
- [ ] Soil moisture
- [ ] Soil temperature
- [ ] Soil conductivity
- [ ] Water level of the flower box water res…
-
When following the directions here, https://github.com/AnaviTechnology/anavi-docs/blob/master/anavi-gardening-uhat/anavi-gardening-uhat.md#examples, apt spits out the following.
```
sudo apt insta…
-
Código utilizado no desenvolvimento de uma estação de baixo custo, para aferir a temperatura, umidade e pressão atmosférica. Projeto aplicado da disciplina de Instrumentação Eletrônica - USF Campus Sw…
-
### The problem
I'm currently testing ESPHome with Raspberry Pi Pico W without anything connected.
After install of new compiled YAML file the board boots, but does not reconnect to the Wifi network…
-
```python from machine import Pin
from machine import I2C
sdaPIN = Pin(4)
sclPIN = Pin(5)
i2c = I2C(0, sda=sdaPIN, scl=sclPIN)
devices = i2c.scan()
if len(devices) == 0:
print("No…
-
### The problem
I'm not able to compile esphome with 2022.12.3 anymore, previous version (2022.11.1) worked.
### Which version of ESPHome has the issue?
2022.12.3
### What type of installation are…
-
The Module I2C module have a bug:
i2c.write is ok (PCF8574)
c=i2c.read(id,1) the mcu restart i have tried with SHT21, BMP180, TSL2561 , PCF8574 all FAIL
Please can you repair this? And have your exam…
-
I was wondering about far to high brightness values after starting the motion sensor sketch/device.
The root cause for it sits in motion.h
```
uint8_t status () {
brightsens.measure();
…
-
## Expected Behavior
Lux value can be calibrated to compensate for front cover of EP1
## Actual Behavior
Lux can only be adjusted via static offset, leading to "inaccurate" measurements compared …