-
I upgraded my Ender 3 V2 some time ago now and could not get the firmware updated at the time so I dusted it off to try again.
for my setup, it is the 4.2.7 with a BL touch that is not plugged int…
-
What do I do if I accidentally flashed the hex file with 'bootloader' in the title?
Please paste the complete output of the `M503` command here.
-
No matter my plug placement, my configuration changes, choosing between Marlin Vanilla, Bugfix, or BTT's Marlin, I cannot get my BLTouch to self test, let alone work.
I'm starting to lose my cool o…
-
[Configuration.zip](https://github.com/bigtreetech/BIGTREETECH-SKR-V1.3/files/5153803/Configuration.zip)
I have been using a BLTouch knockoff for some time on my V-King. I am running it with an SKR…
-
I have an Ender 5 and I am trying to install a SKR V1,3 board.
I got everything setup and working but I am am seeing some inconsistent probing from my BLTouch
I ran the M48 command to test the s…
-
Thanks for this great branch for the Mini E3 and the BLTouch. Just a question (I am new to Marlin 2 -forced here by the Mini E3).
In Marlin 1.9 I selected ABL as Bilinear set the X&Y probe offsets f…
-
OK, so my setup is a bit (over)complicated. I have added a [BLTouch probe](https://www.antclabs.com/bltouch) to my [RPI-CNC](https://wiki.protoneer.co.nz/Raspberry_Pi_CNC#Version_2.51) with a Arduino …
-
Any updates on this?
https://github.com/makerbase-mks/MKS-Robin-Nano-V3.X/issues/73
-
I can not get BLTouch 3.1 working with R4. I have tried two different BLTouch.
I am using these settings:
[stepper_z]
step_pin: gpio19
dir_pin: !gpio18
enable_pin: !gpio17
endstop_pin: probe…
-
### Bug Description
Error message thrown: "STOP called because of BLTouch error - restart with M999" after starting G29.
### Steps to Reproduce
1. Build i3 Mega with standard build-volume, i3…