-
My inverter is PylonTech compatible, but its internal software do not accept dynamic charging control.
Inverter does not have posibility to change any of the battery details.
I can read the invert…
-
To use a toolboard (ebb36) I couldn't query can0.
The following status messages are displayed by the system:
![image](https://github.com/makerbase-mks/MKS-SKIPR/assets/132276283/8cfc4907-423f-4689-a…
DK4YA updated
6 months ago
-
I can't get my SB2209 working over CAN, need help:
I have an Octopus MCU with Klipper, which is connected via USB to CAN Bridge with my PI.
"~/klippy-env/bin/python ~/klipper/scripts/canbus_query…
-
Manual flawed at pages 9, 10, 11
Expirienced the consequences 1st hand. Was not paying attention and destroyed my canbus board and the toolboard.
here is the problem:
![Screenshot 2023-12-20 0…
-
i had a very odd behaviour of the library that drove me a bit creasy for a couple of hours (even if is not a real bug).
I guess that the micro has 8 fuffers to send messages and when those are full th…
-
I'm trying to find the place (CANbus code) to read the "fuel" gauge shown on the dashboard.
Is there a way to read this value?
(We already know how to read SoC.)
-
For a special CAN charger I try to change the CAN ID from standard to extended (for testing I edit Pylon_canbus.cpp):
This is what I done:
Pylon_canbus.cpp:
Row 88:
send_canbus_message(0x35…
-
I tried to connect 2 MCP2515 to MCU via SPI but only first CAN can begin() successful, the second never run
.............
ACAN2515 CAN1(MCP2515_CS1, SPI, MCP2515_INT1);
ACAN2515 CAN2(MCP2515_CS2, S…
-
CANBus Triple: https://github.com/CANBus-Triple/ is an open-hardware device that can read (and write) CAN bus messages. Comes with a standard OBD-type connector by default. The ability to read from …
-
问题描述:
启动canbus时,使用cyber_monitor的先后顺序会影响通道的数据类型
截图:
先启动canbus,后使用cyber_monitor查看通道数据的类型
![JAgx7iSd8n](https://github.com/ApolloAuto/apollo/assets/158550505/5cefd6f0-7369-49aa-8dc3-a02556c181e8)
…