-
**Is your feature request related to a problem? Please describe.**
A clear and concise description of what the problem is. Ex. I'm always frustrated when [...]
I am trying to send a MAC linkCheckR…
-
With the current master changes, tried to build the example sketch in catena 4450 and catena 4612. While doing the step clear the FRAM and redo the provisioning.
Then join not happening, EV_JOINING …
-
Hi,
We have been running lorawan compliance tests on the FW and I've followed the advise given in this slide:
https://lora-alliance.org/wp-content/uploads/2020/11/lora_alliance_certification_deep_…
-
Add LoRa protocol to connect sensors over long distances and send data if no wifi network is available.
-
Three days ago, I came across this project, which is exactly what I needed, as I have an Orange Pi One and a 433MHz SX1278. I've been trying to get this working (with the default config), only partly …
-
Base question/issue: I can't get LMIC_PRINTF_TO working on SAMD21. Tried with Arduino 1.8.6 and 1.8.12 on Windows, both with current LMIC. When I uncomment #define LMIC_PRINTF_TO Serial and set LMIC_D…
-
Would it be possible to support this particular board with the mcci arduino-lmic stack?
https://heltec.org/project/htcc-ab01/
It consist of a ARM Cortex M0+ microcontroller plus a Semtech SX LoRa …
-
I'm currently using this library on ESP devices, and when using deep sleep on these devices, the memory is cleared. It's often a hassle having to restore the entire state of this library, and I find m…
-
Hello guys,
I need help with this because I am trying for a month now to fix this. I have a node device and I have done all the configuration according to [the github documentation of MCCI](https://g…
-
So, I have a bare RF95 Module with the following schematic
and am using an arduino UN…