-
For the BMS to charge lithium cells safely, software should developed to monitor and control charging current and voltage over time.
Requirements
- Charging of the battery cell should be controlled b…
-
Hi, without the Dashboard data i can not use your excellent project. Please upload an installation guide how to build the dashboard. Thx a lot!
-
Right now, the charging algorithm is very dangerous. It's ok to connect the output to a BMS, but not to plug directly on a battery (whatever the chemistry).
It should follow charging curves and als…
-
### Is there an existing issue for this?
- [X] I have searched the existing issues
### What happened?
Unable to display power using three-phase electricity tesla models 2014 P85
### Expected Behav…
-
The good news is that setting the new image for the juicebox_commands branch seemed to work. Also, most of the read values I had before seem to be working. With the EXPERIMENTAL set to true, I see t…
-
ON HOLD INDEFINITELY
-
### Checklist
- [X] I have filled out the template to the best of my ability.
- [X] This only contains 1 feature request (if you have multiple feature requests, open one feature request for each f…
-
Just a note for your Readme: whatever the latest firmware is for this CM1620 seems to allow a much wider voltage range. Using the Android App all cell chemistry 'options' allow changing the cell volta…
-
Define the requirements and follow-up design goals for the power management on v4.x boards: powering the device, charging the battery, power-on/power-off, protection.
DEFINITIONS (loosely based on AX…
-
i lack SMD skill so PCB way was doing the SMD work.
I know i made error getting the older one i just wanna check some of the things i need prep for the holder designs.
i was looking around for R…