-
How do I set a read timeout in ms for the receive function?
Does this work on a board where DIO4 and DIO5 are not connected as a skim through the code looked like this were required?
-
Hi guys,
Just getting started with this core and im having a problem with the LoRaWANtest.ino for the grasshopper.
When i put in my keys and run the example it will hang on join. I have verified…
-
Hi again.
On Murata's datasheet appears the following:
"Normal output power is +14dBm but a PA boost function can be selected to increase RF output to + 20dBm for long-range applications"
Does th…
-
Hello Sir, I want to store a particular value into eeprom and before transmitting have to read and transmit over the lora network. Can you help me out with basic read/write operation in Grasshopper bo…
-
Hello again.
I am extending my programs on this chips and I would like to add security. I would like to know if Hardware AES-128bit Accelerator is implemented, since Murata states that CMWX1ZZABZ-078…
-
I am trying to run a minimal example as suggested in #122. I can see a join accept in the TTN console but the device does not receive any events. Here is the full log:
```
[DBG ][LSTK]: Initiali…
-
Hi there. I am having an issue using a B-L072Z-LRWAN1 board and wanted to use PA12 as an output pin. I have checked variant cpp and added (in the digital block - position 3) the line:
` { GPIOA, ST…
-
**Describe the bug**
I get an Unknown USB Device (Device Descriptor Request Failed) when trying to use CDC Serial on a Discovery L072CZ-LWRAN1. I know the USB works as I've successfully used it with…
-
Hi, thank you for your amazing work! I have 2 questions about Gnat board.
1. Do you sell the board? I couldn't find it on Tindie.
2. Do you have the schematic of the board?
Thank you.
-
Hi
I'm trying to get the Lora module working inside the board RAK811,
With the LMIC library, which apparently works with STM32 Murata CMWX1ZZABZ-078
https://github.com/mcci-catena/arduino-lmic
…