-
This device actually identifies itself as a D578UV2, V100. So I will call it that way internally.
The device is likely very similar to the D578UV and thus the existing codeplug implementation must …
-
Since the radio is available and quite common, I am surprised that - from what I could search - it has not been requested before. So maybe this as a serach engine hint, wait and see if there are any f…
-
Hi,
I gave this a go and as a first step I did a read and then a verify and got an error message:
../dmrconfig -r
Serial port: /dev/ttyACM0
Connect to BTECH DMR-6x2.
Read device: ##### done.
C…
-
Linking contacts in 4000 - 5000 range should be made as private call contacts not group call contacts, that exist in this codeplug. These are PC's and not TG's. They should not be in the RX group, wh…
-
When Keying the radio at times the wrong talk group is transmitted Example.. Radio set to 3100 key the radio and it works fine on the second time it might key up 310 or private call the last caller.…
K5SJW updated
3 years ago
-
I have tested this on md380/md390.
Recently, I randomly opened up settings.ini on the windows CPS and came across the following:
```
[FreqRange]
freq0=[136-174MHz]
data0=60134017
freq1=[350-40…
-
Read/Write multiple Radio IDs into radio/textual config file.
DM5KA updated
4 years ago
-
Fantastic code plug
Edit: VK1RBH is no longer, it is VK1RAC, available for use by anyone not just wicen and is now on 146.900 -600 no tone.
Wade VK1MIC 24/6/20
-
It's possible to connect to the DFU driver directly, without STDFU.dll and STTubeDevice30.dll. See my C implementation as an example: https://github.com/sergev/dmrconfig/blob/master/dfu-windows.c
-
Create an easier user interface that makes sense to people regardless of their understanding of DMR networks or radios.