-
Hi ferensw,
I got lost unfortunately when I've tried to execute homekit_easywave.py on my RPI. I've installed everything including all dependencies. (Python 3.11.2)
1. The Eldat RX09 was recogni…
-
2.7 test case:
```Java
public static void main(String... args) {
SerialPort[] commPorts = SerialPort.getCommPorts();
System.out.println(commPorts.length + " comports found.");
for (Ser…
-
It's been more than a year since I made a release of UsbSerial and I don't really think that's going to change in the short term.
For that reason I would really welcome a collaborator(s) to this pro…
-
Hello!
I received an old Geonaute Count 14+ device and I wanted to transfer the data on Linux, instead of running a windows box just for this.
lsusb shows me the following:
Bus 002 Device…
-
Hello,
Exporting data to GPX format worked fine in September 2016 for my first generation Holux RCV-3000 (using a Mediatek MT-3329 chip for GPS only) with:
Mageia Linux 5.0 + gpsd v3.11 + GPSBabel…
-
is there a mac build of the driver/software available?
-
Hi,
I have been trying this on my Redmi Note 11.
I have tried 3 different usb-serial adapters (ft232, cp2102,pl2303). Also changed cable and flipped connection.
Enabled these configs in kernel …
-
### Introduction
In OH core there is a PR [#3922](https://github.com/openhab/openhab-core/pull/3922) which on new OH installations does the following..
1. scan USB devices on the user's system
2.…
-
Hi, thanks for the great utility, I use it to keep straight which devboard has which firmware by setting it's `Serials`. But with some boards I recently developed I'm met with this. Any help or sugges…
-
Suggestions for the documentation:
- Note that for an RPLidar A2, if the cable is coming out towards the tray, you need to set `flip_axis` to `true` in `config/rplidar_node.yaml` . I'm assuming this …