-
Hello, I have a creality CP-01 with lcd dmt48270c043_06wt and creality V2.5.2 board, I'm trying to install this program and make it work so that I can finally update Marlin 1.1.6 of creality with the …
-
I'm using Creality CR6-SE printer, gcode genreated with Cura 5.6.0
After installation when I upload the file for first print heat bed gets its defined temperature, then nozzle temperature also reac…
-
I was using the Community edition which now seems abandoned. I went to load Klipper to the board and no matter what I try to load, I get firmware flashed incorrectly error. This all began with attem…
-
I have a CR-6 SR with the BTT CR6 V1 motherboard and a TFT70.
I home Z so I can do a ABL. But I notice that it hits the bed to hard each time that the strut bends.
When it has finished the Home Z,…
-
**STOP - DO NOT PROCEED - YET**
I know you are itching to get something fixed and/or you really need help with a problem you are experiencing but before you submit this report, go to the files sect…
-
@tdudgeon thinks this, alignment without maps, is the only thing fundamentally missing.
@ConorFWild will fix this.
Policy: fail unless user updates configuration to either process or ignore th…
-
I'm having trouble understanding this part of the manual:
![image](https://user-images.githubusercontent.com/1426097/99859577-b5c7fe80-2b90-11eb-9f60-4dcfd5716db4.png)
Does this mean the TMC2209…
-
For Dell OS 10, based on configuration from switch, will get port names like this:
```
- Name: Port-channel 1
Node: T2_US_Nebraska_Test:dellos10_s0
Peer: urn:ogf:network:es.net:2013::kans-c…
-
It would be nice to check if they are working and mainboard gets the signal via the LCD. And possibly after flash first boot it should ask user to push endstops by hand one by one before powering any …
-
| | |
|--------------------|----|
| Bugzilla Link | [PR28363](https://bugs.llvm.org/show_bug.cgi?id=28363) |
| Status | REOPENED |
| Importance | P norma…