-
Hello,
Until last week I used RJblakes Domotics version to connect to my TZerra Boiler.
After the raspberry 3b died, i decided to us a ESP board to connect to my boiler.
It works but I missing …
-
Hello , thank you for this ha integration.
I am having a small problem understanding how to setup the cmi to recieve values from home assistant.
i setup a sensor from my heating system to send to …
-
The current order of parameters and grouping in the available heat pump and chiller modules could irritate users, as it is not directly clear what they have to change and what they might change.
I w…
-
There is a way to autotune pid by pumping white noise (of all the frequencies) into a system, then identifying the system using matlab, and using matlab to further give us PID values.
https://www.…
-
When using TriggerMode=External Gate and ExternalGateMode=Pump&Probe the data are 16-bits. I don't understand this, it seems like they should be 32-bits, 16-bits for the pump counter and 16 bits for t…
-
Reporting bugs
--------------
- **Note the precise time the problem occurred** and describe the circumstances and steps that caused
the problem
- Note the Build version (found in the About dialo…
-
The simulated controllable pump that we created for testing FROA has always worked with the "FlowRateObjective" data type. That is just a very simple objective that contains a flow rate and nothing e…
-
I have three identical Hayward VSP pumps. One is for pool/spa filter, one is for in-floor cleaner, and one is for water feature.
I just finally configured omnilogic-local integration into HA. I'm…
-
I attempting to use this code to control my Pentair Wisperflo VST. I purchase the RS485 cable and attempted to communicate with it using an ESP32 connected to a MAX485 adapter however I get following …
-
Hello,
Thank you for your efforts. I have been futzing with my heatpump for ages and finally I have most of the modbus protocol working thanks to your integration.
I'd like to ask for two features…