-
- [ x ] I have searched the [issues](https://github.com/brocaar/chirpstack-network-server) of this repository and believe that this is not a duplicate.
## Summary
When managing an instal…
-
When we added random channel hopping, we added an assert if there is no 500 kHz channel enabled. This was a mistake, because the network can administratively disable 500 kHz and we should continue to …
-
When the first OTAA join fails, the Badgerboard library states:
> Lora: Adding sensitivity: SF 9
> LoRa: warning. Spreading factor not set!
> LoRa: power not set!
> LoRa: datarate not set!
Sa…
-
Hi,
Is it possible to set the sample rate for the accelerometer? In the Arduino library there is a setting that can be altered, but I don't see the same in this library.
Thanks!
-
I have successfully connected to my Pixracer with pydroid3 and dronekit-python via UDP, but need higher Mavlink datarates for my application.
I have been experimenting with the https://github.com/jac…
-
## Issue
When converting a `TimeSeriesTable` to a Matlab struct using `osimTableToStruct.m`, the table metadata does not get stored anywhere in the struct.
## User example
Trying to create a new…
-
A JeeLink is connected to /dev/ttyUSB0.
Everything described below is executed with a user has full access to /dev/ttyUSB0:
When I try to scan the sensors using the following command, there is n…
-
I'm trying to perform a range test using the US band, but I am not able to set SF=12, it caps at SF=10. Now, I'm following this table for the DR configuration, and I'm using the modem.dataRate(8) call…
-
Hi,
Thanks to you, I've tried 'LowLatencyLoggerMPU6050 ' example before with 3.3V Arduino Pro Mini and has achieved rather high data rate. (several hundred Hz)
And saw that 4kHz can be achieved…
-
Hi all,
I want to integrate the sx1302 lorawan packet forwarder with aws server it requires aws key, certifates, trust certificates.
I am trying to configure with sample configuration files am not…