-
Since I still some Umbaue and test, I switch off the Deye or also times the ESPhome device, after switching on, however, irrwitzig high values are sent. Could not this be turned off?
-
Hi,
what about adding support to control "external" 12V PWM fans to cool the Deye Inverter based on a temperature sensor? My Deye 12k is quite noisy on sunny days. To me, it sounds like those fans ar…
-
![image](https://github.com/StephanJoubert/home_assistant_solarman/assets/126504679/e660cfd4-642f-412c-ba4f-e7ed46bcff1a)
See above my data when connected via browser to the inverter/logger.
I c…
-
Hello,
my logger serial number starts with 29xxxxxxx, and when I configure solarman through HA, i get all unknown, can I use this repo integration or should i use a different one?
Thanks
-
In the solar man application I can see the power (Watt) per MPPT for my SUN800G3. This information is not shown in Home Assistant. Could power per MPPT be added?
-
It seems the file is wrong?
-
.
I have two inverters - Deye SUN-5K-SG03LP1 and Deya SUN-5K-G .
I connect to the hybrid inverter without any problems and read all the necessary parameters.
I configure the second inverter in exac…
-
### Issue related to
Sunsynk / mbusd Home Assistant Add-On
### Describe the issue/bug
My issue is that after a proper configuration my Addon stops (HALT).
**Expected behavior**
Should pro…
-
Existing sensor definitions can be found [here](https://github.com/kellerza/sunsynk/blob/main/src/sunsynk/definitions.py)
### You Inverter
Deye SUN-10K-SG01HP3-EU-AM2
```
SN:2312122150
…
bsafh updated
17 hours ago
-
I have come across a new version (V118) of the Deye Modbus RTU Protocol Document.
The previous version of this document that I had access to was V115. The changes in relation to V115 are the followin…
cods4 updated
7 months ago