-
Hi all,
kindly note that when I applied to run one channel HD from udp on DTA 115 rev3 i got this error
* dektec: Got DMA underflow.
* dektec: Got FIFO underflow.
tsp -v -I ip 232.1.10.210:1…
-
```
I'm trying to use satip/vtuner with an Inverto iLNB and VDR, but i have
problems to get it running very well.
I'm starting vtuner/satip in this way:
modprobe vtunerc devices=2 debug=0
chmod a+r…
-
Hi,
To circumvent the limitation from Google, can be intereting if the driver implements a SAT>IP "server". Some SAT>IP "clients" Apps are published in the Google Play. Then, if the driver uses thi…
-
Hello,
I intall TVHeadend via SNAP to RPI 4 with Ubuntu 20.04.1 LTS.
After problems with missing in configuration of connections PLUG and SLOT between TVHeadend and DVB now TVHeadend installed b…
-
Hi, first of all thanks for this great software, I have been using it over the last few months and is fantastic.
The issue I have is as follows, I am merging two DVB ts udp streams, one 1.7 Mbps M…
-
It seems like the device cant attached because satpi cant read the signal stuff? Everything related to "monitor" is 0.
But minsatip and tvh works.
dvb-fe-tool -a 0 -m
Lock (0x1f) Signal= 29,8…
-
I like to do dual-output of my dvb-stream. One stream should do udp-multicast, and the fork of this stream should do output to my dektec-device.
with this both output streams are working for about …
-
Hi,
Kindly I am using the command as beolow and the cjhannel working for 5 seconds and I got the error
tsp -v -m -I ip 232.1.10.215:1234 -O dektec --device 0 --modulation DVB-T --frequency 17…
-
Hi,
Is there an option to add plug-ins to this software (like plugins to Firefox browser) ? This would enable a modular eco-system like gnu radio.
I am interested in DAB+ signal reception, yet it is…
-
Hi Marc 😄
Looks like a great project I stumbled upon today !
1. Does dvbs2 request to dvbc mean ?
2. There are tons of cheap Aliexpress dvbs2 iptv + Sat2IP receivers in the $25-30 range that …