-
I have 2 E220's set up with an esp32 and an esp8266(-01) respectively.
I connected the modules as follows:
E220esp32M021M119TX16 (PullUP 4,7KΩ)RX17 (PullUP 4,7KΩ)AUXPIN 15 (PullUP 4,7KΩ)VCC 3.3v…
-
# 🐛 Bug
I have a package called `amm` and in it a module also called `amm`. When I do `#[expected_failure(abort_code = amm::EFooBar)]` on a test it will error `Unbound module '(amm=0x0)::EFooBar'` …
-
Hey,
i tried to install your addon. Webserver is running and responsive.
I tried every version from 1.0.2 to 1.0.7 sometimes i get a connection but then the sensor values are 95% of the time "unbe…
-
I must be doing something wrong. But I used the cfg provided. I also could not find anything particularly different about this cfg than that used in earlier versions of falcon that do submit to the …
-
https://github.com/ironmonk88/monks-active-tiles/assets/99844555/e5640a07-e220-44ce-aa5d-633822d0f9bd
Foundry 12.325
MATT 11.27
-
## Google Fonts Latin Plus coverage
- [x] Design all the glyphs required in the [GF Latin Plus encoding](https://github.com/googlefonts/gftools/blob/main/Lib/gftools/encodings/GF%20Glyph%20Sets/fil…
-
Using ESP32 Devkit v1, Ebyte E220-900T30D for Sender and Receiver. Have rung out wiring with DMM continuity tests.
Only have an AUX_PIN interrupt when receiver serial monitor is opened or ESP32 is r…
-
### Overview
When connecting to MM, it says that snaps is installed but the wallet only shows EVMs.
To access UTXOs you again you need to uninstall mm and reinstall the extension and then re-add sn…
-
Hello,
I have a problem when I send command SMS with Raspberry that works with gammu.
After a certain period (30 minutes or 3 hours maximum), the command SMS no longer works.
I bought a sel…
ghost updated
3 years ago
-
Hi,
would you consider adding a relative file path completion as an optional source?
Something like [this](https://github.com/lifepillar/vim-mucomplete/blob/master/autoload/mucomplete/path.vim).
…