-
Hi,
I bought an ESP32-Cam and have been using the WebServer script that comes with it to Stream the image from the camera to a locally hosted website. That being said, the quality isn't quite what …
-
I test with esp32s3 on v5.2.2-163-gf81b598d10.
My device is running as an AP and I notice init camera has large impact on networking.
e.g.
Without camera init:
$ ping 192.168.10.1
PING 192.16…
-
Flashed my ESP32 cam board (with OV2640 and the correct pinout for the programmer), also set to 'erase all flash prior to upload'.
After flashing board, board service AP becomes somewhat unstable, …
-
Hi, This seems like exactly what I'm looking for but not getting the stream using the OF single_camera_example. Using an esp32-cam and OF 10.1. I am definitely getting the stream on my laptop and the …
-
chip: https://github.com/espressif/arduino-esp32/tree/master
mb: ch340
https://github.com/easytarget/esp32-cam-webserver
https://github.com/RuiSantosdotme/arduino-esp32-CameraWebServer
htt…
-
HI
Hope someone can help
I have just got a SEEED Xiao ESP32S3 sense board + Camera
https://www.seeedstudio.com/XIAO-ESP32S3-Sense-p-5639.html
When i try to compile this i get the following e…
-
I have installed and set up mayhem with my flipper running xtreme, and everything works well except that sniffed pcaps are not saved to the sd card. It saves logs, but only empty pcaps. My esp32-cam i…
-
Hi,
thank you for this nice project.
Not an issue per se, but is it possible to remove the Micropython firmware I've uploaded to a Esp32-Cam AI-Thinker?
so to get back to upload C programs to th…
-
Your code works. It was possible to send photos between devices.
(ESP32-CAM + Lora module Ra-01) -> Sender
(ESP32 WROOM 32 + Lora module Ra-01) -> Receiver
Everything worked, but there was one BI…
-
Hi,
I would be interested in:
https://eloquentarduino.github.io/2020/05/easier-faster-pure-video-esp32-cam-motion-detection/?utm_source=old_version#tocfull-code
Unfortunately the repo / code is…