-
Arduino:1.8.12 (Windows 10), 开发板:"ESP32 Dev Module, Disabled, Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS), 240MHz (WiFi/BT), QIO, 80MHz, 4MB (32Mb), 921600, None"
In file included from E:\esp8…
-
### Wiki Search Terms
heat, power consumption, esp32
### Controller Board
none, just the ESP32
### Machine Description
nothing
### Input Circuits
_No response_
### Configuration file
```yaml
…
-
I have this:
```
Archive: /home/merlin/arduino/tools/ESP32FS/tool/esp32fs.jar
Length Method Size Cmpr Date Time CRC-32 Name
-------- ------ ------- ---- ---------- ----- ------…
-
It would be a great addition if it would possible to integrate the file upload for Spiffs and LittleFS to the spiffs area of the esp. It is mostly overkill to do it over the external SD Card. But m…
-
Getting compile error in platformio with SensESP v3 in file **_analog_reader.h_** when using ESP32-S2 and S3 variants:
**_pio/libdeps/adafruit_qtpy_esp32s3_n4r2/SensESP/src/sensesp/sensors/analog_r…
-
I think that when the execution start the best option is to show the menu. Sometimes when the emulator fails to load a rom to the app0 partition fails to boot and the user needs to reprogram that part…
-
## Environment
- Audio development kit: [ESP32-Dev]
- [Required] Module or chip used: ESP32-WROVER-E
- [Required] IDF version: v5.2.1
- [Required] ADF version: v2.6-86-g1a03fe6acd esp-id
…
-
### Hardware:
Board: ESP32-CAM
Core Installation version: 2.0.0
IDE name: Eclipse / Sloeber
Computer OS: Windows 10
##
![2021-10-20 18_59_55-Prop…
-
Arduino:1.8.12 (Windows 7), Tarjeta:"ESP32 Dev Module, Disabled, Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS), 240MHz (WiFi/BT), QIO, 80MHz, 4MB (32Mb), 115200, None"
C:\Users\DAVID MONTOYA\Doc…
-
Hi there. I built an ESP32 Radio based on this kit: https://www.instructables.com/HackerBox-0070-Radio-Over-Internet/ and flashed it with the V2 firmware, which was not available at the time it was fi…