-
Hi everyone, I am planning to use the following setup with my pi juice zero:
- Pi Zero, Pi Juice Zero, DFRobot Motor Driver hat, and a fan
The driver hat requires an external power source to pro…
-
The arduino controlling the print head will obviously have to be coded.
Code that this will control is
1. The fan
2. The thermocouple (reads the temp on the hot end)
3. The heater for the print e…
-
### Device model / 设备型号
[zhimi.airpurifier.ma2](https://home.miot-spec.com/s/zhimi.airpurifier.ma2)
### Component version / 插件版本
0.7.9
### HA core version / HA版本
2023.6.1
### Integra…
-
When considering components, I think you are missing some components that are incorporated in many appliances and radically effect the fingerprints produced by those components, namely the control com…
-
I am only seeing FAN motor rpm and CFM. So I know I am connected and working correctly. Everything else are zeros for temps etc.. I am guessing infinitive is not aware of this variable speed furnac…
-
Currently the board that we are using appears to be an adjustable DC-DC boost with a fairly narrow range. From my tests I found 17.7-24v (feel free to confirm). I'm guessing that the fans take 0-24. …
-
I connected 12v relay to D9 in order to start up the CNC spindle motor.
but all I get is very short blink (led) - the D9 needs to be HIGH , until M5 code sent and not PWM
the config file :
#defin…
-
Currently there's a thermistor provided by the fan control (see #1339). Translating the measurements of this device to voltage is configurable via the 3 buttons and LED on the fan control board.
T…
-
n this dual XY core and common Z configuration, you'll need to control the independent XY movement of both print heads, which requires additional stepper motor drivers and pins. Additionally, you'll s…
-
### Device model / 设备型号
[dmaker.fan.1e](https://home.miot-spec.com/s/dmaker.fan.1e)
### Component version / 插件版本
0.7.8
### HA core version / HA版本
2023.4.6
### Integrated mode / 集成方式
…