-
(Mentioned in #34, but unclear about details.) `rust-radio-sx127x` dependencies on the version of `radio` confuse `embedded-hal-compat`
Version 0.10.1 of `radio-sx127x` on crates.io uses `radio` …
-
**Describe the bug**
Certain functions in Loom that is used for the WiFi dendrometers have been set as protected instead of public in Loom 4.6
**Hardware in Use**
Feather M0 WiFi
**To Reproduc…
-
I'm curios what people think of adding an option to strip out the "RadioHead" header and just allow the user to send/receive a raw payload. This would allow the library to be more compatible with othe…
-
I would switch to storing raw data, rather than strings.
There is probably a significant overhead in doing a string conversion, because you're implicitly calling itoa a bunch of times. You'd be bet…
-
This issue tracks the porting of boards and SoCs to https://github.com/zephyrproject-rtos/zephyr/issues/51833.
### SoC series: AGILEX
- [x] soc: AGILEX
- [x] board: intel_socfpga_agilex_socdk, …
-
**Describe the bug**
On Loom version 4.6, it seems dendrometer will no longer take measurements on the set sleep cycle intervals. It seems the Hypnos does not wake up unless the interrupt button is u…
-
This does not appear to be a CP issue, but an issue with the HW. It was suggested that an issue be opened to discuss it.
Setting the transmit power to 23 on the feather RP2040 RFM9x board causes is…
-
I am using the provided example `ttn_abp.ino` (`CFG_eu868`) from the git head version of this library,
modified with this configuration:
```cpp
#if defined(ARDUINO_AVR_UNO)
const lmic_pinmap lmic_…
-
pi receiver
https://learn.adafruit.com/adafruit-radio-bonnets/rfm9x-raspberry-pi-setup
feather transmitter
https://learn.adafruit.com/adafruit-feather-m0-radio-with-lora-radio-module/circuitpytho…
-
I have a m0 adalogger with the 900mhz lora wing
i have an m0 lora feather
i download example code from
https://learn.adafruit.com/radio-featherwing/circuitpython-for-rfm9x-lora
on the m0 lora…