-
This is raw notes. This will get edited multiple times prior of having a base to create a wiki page.
The quick way, no-brainer, is to reflash the same downloaded/compiled firmware and keeping set…
-
After I replaced the MCU in my K5 and flashed the Quansheng bootloader and firmware, I found that the screen displayed stripes upon startup and the device became unusable. I am quite puzzled by this…
-
fwupdate in linux needs a signed binary image to pass to the uefi capsule update.
-
Hi, I'm trying to Flash coordinator FW and keep getting "bytearrary index out of range". As you can see below, everything seems to do what it is supposed to do until it starts writing at the end.
A…
-
Ahoj,
I want to use the [OpenWrt firmware selector](https://firmware-selector.openwrt.org/?version=SNAPSHOT&target=rockchip%2Farmv8&id=friendlyarm_nanopi-r5c) to build a customised snapshot image f…
-
Hi Matthias,
edi-cl is a huge help to build our system-images.
**Context**:
With the newest release r3.2.1 from compulab we need to update the firmware of our devices as the new kernel won't wo…
-
Installation on NAND requires installation MicroSD card. It would be convenient to be able to put right in the NAND using LiveSuit, but it needed the images in a special format. Some Linux distributio…
-
I have a new set of Xiomi temp sensors. I am trying to hardware restore the original firmware since these have the new Xiaomi firmware but the prcoess an the page here is not working
https://pvvx.gi…
-
Currently, we build the kernel containing modules and firmware, but the firmware is not needed for the cloud images, like GCP, AWS, Azure and so on.
Removing firmware when building cloud images als…
-
### 详细叙述
x86中安装了一张RTL8822CE无线网卡,固件里已勾选编译并安装kmod-rtw88和rtl8822ce-firmware,其工作在AP模式,但在无线概况中显示其信号为0dBm,并且手机也接收不到它的信号。详细信息如下图。
![image](https://github.com/user-attachments/assets/2b6ff50e-701b-4c15-92ee…
wzwtt updated
3 weeks ago