-
### Description of the bug
**Ini file - Octoprint
**Reality -Octoprint
Prusa Slicer - FlashAir ???!!!
When you sending job to ptinter you will get error 56, changing to octoprint and
saving set…
-
I've been experimenting with this gcode for a bit and my printer always pauses during the purge line or just before it for some reason. The screen looks normal, but it will do absolutely nothing until…
-
Dear all,
I have recently purchased the Bigtreetech SKR PRO v1.2 Mainboard, the TFT35-E3 v3.0 Display and the ESP-01S WIFI-Module. I was able to install them, but now I have following Problem:
Sin…
-
I own a MakerBot Replicator, and I'm interested in getting OctoPrint to work with it. Since the MakerBot firmwares (both MBI and Sailfish) are open source, as is all of the software required to transl…
-
### What happened?
Select host type Duet, and it give can't connect to octoprint.
Have to select FlashAir to connect to the Duet.
### Project file & How to reproduce
Select Duet and it thinks it's…
-
-
a flash air SD card is a sd card that has also a wifi connection.
now there is something in the marlin initialization code of the sd/wifi card that when it accesses the sd card the wifi is not working…
-
Under the environment of same camera / same card setting / same network,
Flashair card scan speed and file copy speed of Snowy plus 3.0.1...
It is considerably slower than that of Snow 1.9.0.
Wh…
-
### The problem
Testing resolution of #4082. Connect to Prusa MK3S firmware 3.9.3. Select G-code from printer's SD card and click "load and print". Nothing happens.
Revert back to OctoPrint 1.5.…
-
[Suggestion 1]
The Standard version includes the first 7 basic options out of total 11 of Plus version.
I think it's appropriate to swap the positions of the following two options:
Because [Do not …