-
### Describe the bug
I am getting no gyro found in kakutehH7 i flash px4 firware for kakuteh7
### To Reproduce
no Gyro Ffound, no compass found
### Expected behavior
sensor has to be detected
##…
-
**Describe the bug**
When an airspeed sensor becomes available more than 2 seconds after system boot, the corresponding airspeed validator does not get the correct parameters until a parameter update…
-
Class Definition: __environment__
"information about the environmental conditions during the acquisition"
Rules:
- [ ] optional
---
Element Definitions:
* averageAirTemperature: (real) "aver…
-
### Describe the bug
I am connecting _two_ [LIDAR-Lite V3](https://www.garmin.com/en-US/p/557294) sensors on the I2C port of Pixhawk 6C using the [I2C Splitter](https://www.amazon.com/Pixhawk-i2c-Spl…
-
[pololu/vl53l0x-arduino: Pololu Arduino library for VL53L0X time-of-flight distance sensor](https://github.com/pololu/vl53l0x-arduino)
-
### Describe the bug
I am having hard time making _bmi088_i2c_ driver to work.
It is used **only** in CrazyFlie, **other platforms use SPI version** (which I don't have).
I use _SeedStudio BMI0…
-
When being in the configurator in the Setup Tab I was viewing random movement of the quad, although it was sitting still on the table. Please see the attached video.
https://github.com/user-attachm…
cptX updated
2 months ago
-
The parameter system is primarily used for user configuration of the vehicle. It's also used as storage for several onboard systems like calculated sensor calibration values, storing vehicle flight ti…
-
### Describe the bug
After updating the firmware from `v1.13.3` to `v1.14.0` and recalibrating all on-board sensors, the autopilot (a mRo Control Zero H7) is showing these alarms even after calibrati…
-
### Describe the bug
GPS outputs correct data, but is not listed as a participant in the sensor bar. This also means that no data is displayed in the OSD even though the FC processes it. It is the …