-
**Describe the bug**
The integration just stopped working 7 days ago and not able to pull any data.
Is was working fine for several months before and no changes were made with the exception of HA v…
-
My setup is two KH10.5 wired in parallel (master/slave enabled) and connected to full stacks of HV2600 8* batteries per inverter.
The inverter and batteries are all on the very latest firmware using …
-
![Screenshot_20230714-171531_Home Assistant](https://github.com/alpriest/EnergyStats-Android/assets/63789168/66cae560-1ef9-44b5-a190-678bc910c7e9) ![Screenshot_20230714-171604_Energy Stats](https://gi…
-
### Describe the bug
Active Battery Control to protect the battery from discharge protection seem to work in setting the minimal SoC (MinSoc) to the current or prespecified value. But after charging …
-
Is it possible to add sensors for the CT/meter inputs?
I feed in from an additional inverter which is shown on the Fox cloud display but not recorded
-
Quick question about the BMS Watthours sensor;
Should this be the same as the kWh (x1000) value that is available in the Foxcloud data report?
If so then I think I have a problem;
Fox…
-
### Web browser
Chrome
### Web browser version
Version 127.0.6533.88 (Official Build) (64-bit)
### System Health details
## System Information
version | core-2024.7.4
-- | --
installation_ty…
-
Hi guys
I get negative power readings as soon as the PV side of the inverter goes to sleep. I have a hybrid system.
It will remain at about -120W during the night
![image](https://user-images.…
-
My inverter allready is connected to my home wifi network. How can i use this intergration to ready data from inverter in Home Assistant? I was using Other integration but after api update it stopped …
-
I have v0.19 with a dual hybrid inverter setup.
It works fine for hours/days on end, but intermittently in the logs there is the following;
2023-02-27 01:00:57.239 ERROR (MainThread) [homeassist…