-
#### Description
I want to create an integration for HomeAssistant so I can monitor my CNC machine in the same way that I monitor my 3D printer using OctoPrint, however I am unable to find any docu…
-
Hello,
Currently I am using the TinyG2 (FW 100.26) on the Arduino Due to control a X,Y,Z CNC table. It works great, but today I started using the motor enable pins because I do not want the motors …
-
#### Description
Based on https://github.com/MarlinFirmware/Marlin/issues/14734
and
http://linuxcnc.org/docs/2.6/html/gcode/gcode.html#sec:G10-L1_
I have basic understanding of GCODE and C++…
-
#### Description
The CNCjs did not send G-code to TinyG2 when Missing trigger On get {"qr": 6} even the Planner Buffer >=7.
finally, Planner Buffer reach at 48, tinyG2 has to stop.
#### Ve…
-
#### Description
Trying to get RTSP webcam working on CNCjs on a Pi. Working through the help files and it requires FFserver which is no longer a valid function within FFMPEG library. How is best t…
-
#### Description
Clicking on the "three dots" of a widget and then clicking remove. Neither button [cancel / OK] has focus and hitting the "TAB" key shows that the underlying app still have keyboar…
-
Any sort of interactive app, file, or macro ... becomes virtually impossible to use with "authorize". You should be able to turn this check system on and off in apps, files, and macros. And, at the en…
-
#### Description
I know that this will be embedded in the new version under 3D View but is possible to activate it under the settings menu? I just like to see what command will be executed and when l…
-
The Gcode-wiki-page (https://github.com/synthetos/g2/wiki/Gcodes) lists a "gcode message": (msg ...)
> Gcode messages are comments that begin with the characters msg
> (case insensitive). These wi…
-
Hi
i like to use this project with close loop DC motor with encoder feedback , i looked at source & found pulse generation codes is embedded with trajectory generation codes and not found any place t…