-
Provide the ability to navigate from the current position of the toolhead within a view (which can/is adjusted using the horizontal and vertical sliders) to go directly to the relevant location in the…
-
Rick,
I made a polargrah like Sandy Nobles and a corexy like Axidraw.
Both can be controlled by your controller. Its clear that both Repetier and Marlin support them. But how about the penplott…
-
The ColorPrint plugin at the generate/save state hang (or take very long) on 44%.
The file is almost finished in the hdd, just missing the end (flush()?)
I tried with big file, and a short one the …
-
even though the part cooling fan is set in slicer to be off for the whole print it is at 100% as soon as the gcode is loaded... unsure how to fix this myself, tried double checking the printer.cfg for…
-
### Is there an existing issue for this?
- [X] I have searched the existing issues
### Forums discussion
_No response_
### Version
0.20 (Release)
### Full version info
```shell
[…
-
hello,
currently running v1.0.2.
the issue i am having is that i can not get M204 to set the PID for the hotend.
i am using code M204 X24.51 Y3.54 Z63.71 and entering it within Repetier-Host …
-
First of all thanks for this great tool! I use it to control a paper cutting machine I made by modifying a cricut machine to run grbl. I have an idea for an enhancement, I don't know how difficult it …
-
### Is your feature request related to a problem?
I dont like that you can create a .gcode file with this program, and then reload that same file, and the gcode will not be loaded.
### Describe the …
-
Hi,
I realy love grblHAL and this sender. One thing I am regularly missing is the possibility to start, restart or resume a milling job from a certain point in the code. This would be very helpful …
-
Silc3r version 1.2.9
Windows 7, repetier host 1.6.2
Using spiral vase to make a part with a bottom layer, the travel move between the last infill track and the start of the spiral vase is an extru…