-
(ham radio enhancement) Would be awesome if you could integrate with RumlogNG to get rig control data. Rumlog provides network accesses to FLdigi and WSJT over network interfaces (specifically uses a…
-
For crossreference:
https://www.arednmesh.org/content/any-plans-how-approach-new-wifi-hardware
I just heard about this project by chatting with someone online.
I'm working a lot with another Open…
-
[Hamlib](https://hamlib.github.io/) is an Open Source project that implements common API for controlling different HAM radio setups that, well, can be controlled by software. Including rotators. It wo…
-
Hi, I'm Denis (K0TX) - a ham behind [digirig project](https://github.com/softcomplex/digirig).
The interface's sound card works with Hammer Plugin, but there is also a serial COM port that allows PTT…
-
### What happen
Luacontroller overheats when the receiver send information on "get" command, due to too much information is send over a short amount of time.
### How to reproduce
Include this line …
-
Some of the ham radio and broadcast bands are wider than the respective bandwith for the maximum sample rate of 312 kHz.
I always like to use the bandscope so I can monitor a wider frequency range.
…
DK8JV updated
10 months ago
-
Hi Georg,
since a few days I'm using your great APRSdroid app after using another OS on my mobile phone during the past few years.
It's really a great app and I like to use APRS for special purposes…
DL2MF updated
1 month ago
-
Hi, I'm Denis (K0TX) - a ham behind [digirig project](https://github.com/softcomplex/digirig).
The interface's sound card works with SSTVEncoder2, but there is also a serial COM port that allows PTT …
-
Hello,
I've been exploring the LoRa APRS Tracker project and find it incredibly useful for ham radio activities. However, I noticed that it lacks support for APRS item mode. This feature would be h…
-
Hello,
What I would like to see is a custom frequency Doppler correction on linear satellites, either uplink or downlink.
When downlink frequency is entered, I would like to see what should be the …