-
Hi Karl @hammar ,
@davidemassarenti has a feedback on Relationships we have added in REC models. When uploading BMS data into ADT, he is using externalIds property to modify only twins which are c…
-
Hi @DieBieEngineering,
Since VESC FW3.62, a [0x50rd command](https://github.com/vedderb/bldc/blob/e1c859c894bf88b082e589234dc8c78125b9fb8e/datatypes.h#L754) has been added.
This conflicts with you…
-
It was working fine before vacation, I left the ac turned off during vacation, and now I am back and it’s not working anymore. I tried to delete the device and add it again, it sees it, but it’s doesn…
-
Hi, friends! JK-B2A8S20P HW V11.XA SW **V11.48** is supporting? Can i connect this BMS directly over GPS port to Wemos D1 RX-TX pins, do I need to install any converter? Or can this BMS **only** be c…
-
Hi,
my goal here is to gather information about the different BMS models sold under the Daly brand. We know that there are two different models around, the "normal" ones and the ones with "Sinowealth…
-
With later firmware versions (>2017) of the infini-/mpp-solar 10+15kw inverters, full bms support was implemented.
Only supported BMS I'm aware of is pylontech via RS485 bus. You need a extra modbus-…
-
Hi,
is it possible to use the Victron MK3 USB to VECan adapter to connect to a BMS via can?
If so, what would I need to do to achieve this.
Regards
Magnus
-
Hi,
Can you add instructions how to install it on autopi?
I have a 22 KonaEV and I cant get data from any other module than BMS.
-
### Is your feature request related to a problem? Please describe.
Some people use batteries with a rather low capacity together with very potent inverters and/or solar charge controllers. Limiting…
-
Hi your work has been a great help and thanks for your efforts. I am a novice at this but have so far suceeded in getting a modified 4 cell three temp MQTT version running with three JBD BMS's feedin…