-
I'm getting intermittent spurious values returned from pio version versus gpio version. I'm using a Raspberry Pico W with a run-of-the-mill hx711 board and a 1kg shear beam loadcell in a test mount. P…
-
I believe I have a solution to the wdt timer issue and "yield()" problems.
I believe that the problems come from the HX711.read function in HX711.cpp.
Here, the code does a yield() whilst waiting …
-
Would be good to get functionality like [Filament Scale for octoprint](https://plugins.octoprint.org/plugins/filament_scale/) proivides where you use a HX711-based load cell to read out the current we…
-
Followed the directions to install g++ 4.8 as well as wiringPi, but still having issues installing this node component.
I'm not competent enough in this type of software to understand what's going …
-
Hello, I'm trying to make a kitchen top weighing scale wireless capable and I successfully connected the salvaged body with load cells to HX711 based sensor which I have connected to an ESP32 devkit. …
-
Hello, I am a newbie to arduino and nodemcu things.I am in need of help where i am using a ESP8266 12E nodemcu with 1kg load cell sensor to get the weight value . Actually,it worked fine with arduino …
-
I have built a scale to weigh fish using the HX711. I have the scale calibrated and it is showing the proper weight in testing. However due to drifting I need to tare the scale back to zero before w…
-
I am converting a scale application from a raspberry pi to the Adafruit nRF52840.
This requires converting existing python code from standard python to CircuitPython.
I'm looking for informatio…
-
Firstly, @bogde thanks for this excellent library.
I can't get scale.set_gain to go into the 32 scale mode with a scale.set_gain(32) call but that's probably me being stupid.
I'd like to use two HX7…
-
Hi,
you wrote that in v0.5 you replaced the glued BF350 with footprints for SMD resistors. Which type of SMD resistors do I need to make it work with the HX711. Just default 330 ohm SMD?