-
The nodes interact with the sensors using I2C. These sensors are:
- [MS5637-02BA013](https://www.mouser.com/datasheet/2/813/MS5637_Datasheet-2490129.pdf)
- [SHTC3](https://media.digikey.com/pdf/D…
-
Hardware setup:
MPU9250 Breakout --------- ESP32
VDD ---------------------- 3.3V
SDA ----------------------- 21
SCL ----------------------- 22
GND ---------------------- GND
NCS ----------…
-
I'm sorry for the possibly stupid question. I'm new here. Is it possible to see a sample code for working with multiple sensors.
I want to use all 4 Arduino Mega serial ports
-
Hi
I tried with much frustration to get this to work.
I was using the web server to -> config -> sensors and choose sensor A as the BME sensor to 280, on bus 77
I was able to check via a python …
-
see #5
this one is fairly simple, but has lots of room for expansion if there are ppl interested in looking further into it
Responsible for ensuring the system is healthy, and alerting if unhea…
-
### Board
[SparkFun Qwiic Mux Breakout - 8 Channel (TCA9548A)](https://www.sparkfun.com/products/16784)
### Notes
[Arduino Library](https://github.com/sparkfun/SparkFun_I2C_Mux_Arduino_Library)
[Py…
-
I am requesting a driver for `SIM7600X` series.
### Device description
* The `SIM7600` is Multi-Band LTE-TDD/LTE-FDD/HSPA+ and GSM/GPRS/EDGE module solution in a SMT type which supports LTE CAT1…
-
The current Firmata implementation (and protocol) only allows for a single I2C interface per board. For Firmata 3.0, update the protocol and implementation to allow for multiple I2C interfaces (SCA0 /…
-
1. Background
+ One MCTP Endpoint can support multiple medium interfaces: I2C, USB, PCIe-VDM. The speed of the different medium interface can be different. The sensor polling, event monitoring should…
-
I was trying to use the stemma pins on some feather or qt py adafruit boards without using i2c (using other interfaces or simply the underlying gpios)
and i noticed that there is no easy way to i…