-
I am trying to read the value of 2 pin (Header X12 pin 5 and 6 the GPIO 18 and 19)
It totally works fine using mraa_gpio_read, but the problem is the high overhead associated.
This code will also …
-
Hi,
I already raised this on forum.chrultrabook.com but now I found this to be the preferred place for bugs.
Issue happens under Fedora 39, Ubuntu 23.10 and most probably any other distribution.
…
-
# Version Number
1.0.1
# Bugfix or Enhancement
Enhancement
# Description
If you keep the PB6 and PB7 pins of the MCU free from other signals, these could be used for I2C based peripherals.
A…
-
Do 'I2C_Transmit' and 'I2C_Receive' functions work correctly?
When I use them, error 14 is returned.
-
**Description**: I believe there is a potential memory leak in the implementation of `I2C_eeprom::setBlockVerify()`. This is the relevant code snippet:
```cpp
bool I2C_eeprom::setBlockVerify(cons…
-
```
# echo 2 > /sys/devices/pci0000:00/0000:00:02.0/sriov_numvfs
sh: 6: cannot create /sys/devices/pci0000:00/0000:00:02.0/sriov_numvfs: Permission denied
```
what`s wrong ?
-
For various reasons notably including a desire to easily use an NVME drive we are targeting the Raspberry Pi 5 in our testing.
We are trying to use:
* rpi5
* python 3.11
* Ubuntu 24.04 (23.10 u…
-
I am using this library to sample some sensors over the I2C bus using the PRUs on the Beaglebone Black. It seems as if only the first transaction works correctly, after which the library seems to only…
-
The Mbed I2C implementation has two restrictions that are easy to violate:
- Only one I2C object may be created for each I2C peripheral on the chip
- The frequency must be set at the bus level, not …
-
```
Hi,
please find attached the necessary files to use some familiar EEPROM chips.
Such chips are a part of the new HAT standard for RPi adapter boards.
This driver is implemented inspired by the …