-
### Description
Installed Bliss-Go 14.10.1 or 15.9 on my tablet PC(teclast X3 plus).
When boot into launcher, gravity sensor start to work and rotate the screen. In Landscape the direction is revers…
-
I have some a custom HDL core connected to the FPGA ad9361 core. I need to enable the DAC channel so that my samples get played out on the DAC. I do this by creating a bufffer, then creating a dummy b…
-
Add support for the serial interface to the AD2S1210 using Mbed.
## Tasks
- [ ] If not already setup, setup hardware for testing
- [ ] Create page on ADI wiki with wiring diagram/table
- Con…
-
Here is my adventure in trying to make my ant-sdr work.
date: 2024/06/06
OS: Ubuntu 24.04
Following: https://antsdr-docs.microphase.cn/en/latest/device_and_usage_manual/E200_Getting_Started_Guide.h…
-
GNU Radio 3.9 moved from SWIG to PyBind11, which might explain this build error (on macOS):
```
==> cmake .. -DPYTHON_EXECUTABLE=/usr/local/Cellar/gr-iio/HEAD-d0a4adc/libexec/venv/bin/python
Last…
-
Hi! I was curious if you'd have any advice on implementing this on a Yoga 11s.
I don't have much experience working with kernel modules but I bet there probably aren't too many modifications needed t…
-
Please set CONFIG_AK8975=m
Tested with:
* https://gist.github.com/jadonk/99288dd94fb16b6c764c7c81c7735dd0
* https://gist.github.com/jadonk/bcc5f1e65f39406800c3c32cb81290b1
```
debian@beaglebo…
-
Per the [SanCloud barometer guide](https://www.sancloud.co.uk/?page_id=610), the metholodogy to read the barometer part of the sensor (LPS331AP) is as follows:
1. Identify the device in `/sys/bus/i…
-
For certain IIO devices (such as the ADRV9002 in MIMO mode), the channel names of the devices are suffixed with _i and _q, while retaining the same channel number.
The eval function in math_express…
-
I am currently trying to implement Openwifi on an ADRV9361-Z7035-BOB board and I would like to know where exactly we should copy the BOOT.bin and devicetree.tdb files? One more thing, when we want to …