-
I have 2 builds in progress. Both running Airbot F7V2 FC's & iNAV. In the first quad I installed 4 BetaFlight 35A BLHeli32bit ESC's. Flashed board to BF so I could use passthru BL32 Suite. Configured…
-
Hi, Is it possible to use qczek lrs to transmit location data (lat, lon, altitude, heading, speed)(take data from mavlink telemetry) and receive data from other qczek lrs, like https://github.com/mist…
-
I setup some config with WeAct Studio STM32F405RGT6 Board but motor 4 (PWM) does not work. I tried with 2 boards and also probed the signal with an oscilloscope but not signal is shown.
It would…
-
I'm trying to receive data from an INAV FlightController with DroneKit using a Raspberry Pi as a companion computer with DroneKit.
When calling `connect()`, it doesn't return though, even though me…
-
The Outputs Tab misses the numbering on the Motor Graphic to identify motor positions and test order:
![i…
-
I actually am writing this only to get in contact with you regarding another issue with Inav you created here on github.
This one: https://github.com/iNavFlight/inav/issues/2561
Here you say tha…
-
French law will soon (July 2020) request that all UAVs weighing 800 grams or more at takeoff must be equipped with a device that allows to electronically signal its presence.
This electronic signal…
-
**Is your feature request related to a problem? Please describe.**
No. It will be convenient to gauge the efficiency of a particular rig, independent of cell count and battery sag.
**Describe the…
-
For some reason, my Barometer Bmp280 is not working on the updated version of iNav 7.1
It was working fine on iNav 7.0 and betaflight 4.5
Here's a screenshot:
![image](https://github.com/user-…
-
I'm having trouble connecting to inav after flashing versions 7.0.0 and 7.1.0. Do you have any suggestions?