krzysztofkuczek QCZEK_LRS issues

krzysztofkuczek / QCZEK_LRS

RC LRS 1W system, based on LORA RF modules.

17 stars 5 forks source link

issues

Newest

Newest Most commented Recently updated Oldest Least commented Least recently updated

Looking forward to expanding the third pwm channel

#36 hjchjcjh opened 2 years ago
1
Support of SmartAudio

#35 brat002 opened 3 years ago
0
Branch for new version E32-433T30D 1B ?

#34 TomekFrs opened 3 years ago
3
proper conversion of flight mode from mavlink to sport for inav

#33 RomanLut opened 3 years ago
3
Mavlink broken on TX side, if sbus f/w.

#32 whoim2 opened 3 years ago
5
Source code?

#31 annoyinganime closed 3 years ago
1
ESP32 LoRa modules with custom firmware

#30 ddosoff closed 3 years ago
1
SBAS + S.Port Telemetry. Тelemetry lost, LED on the transmitter goes out

#29 AlexeyII closed 3 years ago
4
Taranis X7: Telemetry lost / restored. Telemetry constantly falls off / on. Switch flight modes (CPPM + S.Port)

#28 AlexeyII closed 3 years ago
4
LUA script: Azimuth on the sensor comes in the form Х.ХХ

#27 AlexeyII opened 4 years ago
2
Bi-directional transparency mode

#26 artemsh opened 4 years ago
1
Telemetry speed

#25 artemsh opened 4 years ago
0
extend default channels spacing from 125kHz to 250kHz

#24 krzysztofkuczek opened 4 years ago
0
FPort protocol #enhancement

#23 RMFPV opened 4 years ago
0
Idea for hop channels lost packets statistic

#22 RMFPV opened 4 years ago
0
qczek as radar

#21 artemsh opened 4 years ago
3
add mavlink msg status text

#20 Imen-D opened 4 years ago
1
connection problem

#19 oguzhantasdemir opened 4 years ago
0
Convert mavlink servo position from RxD(on transmitter) to SBUS on AUX receiver

#18 TomekFrs opened 4 years ago
2
AUX as third PWM output (e.g. flying wing need only 3 channels)

#17 TomekFrs closed 4 years ago
2
Entering settings mode - discrepancy between TX and RX

#16 pawelsky opened 5 years ago
0
No S.Port telemetry data in 1.92

#15 DiscoMan18 closed 4 years ago
4
[new project] QLRS as pure telemetry link

#14 giacomo892 opened 5 years ago
5
SBUS failsafe. Add on option to keep channels as they are

#13 giacomo892 opened 5 years ago
2
Add a serial bootloader

#12 giacomo892 opened 5 years ago
1
[Feature request] To make one PWM-out working with LBEEP at the same time.

#11 RMFPV opened 5 years ago
0
New file naming convention/build process automatization

#10 krzysztofkuczek closed 5 years ago
3
Mavlink angle/heading

#9 urlu75 closed 5 years ago
4
Dwustronna telemetria mavlink.

#8 max4i opened 5 years ago
0
[Feature request] Send RSSI in dbm and SNR in db via S.Port telemetry, not raw register values

#7 DiscoMan18 closed 5 years ago
8
no of satelites not displayed with UBLOX temeletry

#6 krzysztofkuczek opened 5 years ago
6
problems with using two LRS in same place

#5 krzysztofkuczek opened 5 years ago
0
SNR calculation

#4 krzysztofkuczek closed 5 years ago
2
sport telemetry altitude is not home releated

#3 krzysztofkuczek closed 5 years ago
1
extend CPPM gap

#2 krzysztofkuczek closed 5 years ago
1
switch to minimal RF (TX part) power when SBUS input is in use and there is no SBUS signal

#1 krzysztofkuczek closed 5 years ago
6