-
As Zigbee2MQTT states in its logs, ezsp support will be soon dropped in favor of ember. https://github.com/Koenkk/zigbee2mqtt/discussions/21462
```
[2024-05-18 11:44:24] warning: zh:ezsp: Deprecate…
-
Hi @Manuel83
Love your new concept with extensible plugins, thinking about following setup:
- CBP runs in the cloud on any hoster
- actuators and sensors remote by plugins
Example: using ht…
-
### What happened?
After recent update to laters version Z2M (1.33.0-1) all Hue Zigbee devices are droping from network and become unavailable. Requires Z2M restart to bring them back
### What did y…
-
Hi,
i've a zbdongle-e with last router firmware that don't permit to new device to join in zigbee network via zigbee2mqtt homeassistant addon.
firmware installed link: https://github.com/itead/So…
-
Hi,
i would give the stripinvades a try. i use a itead iboard, but if i compile the sketch directly after download from here it is to big. i am only using type ws2801 library.
What do do? Where shoul…
ozett updated
10 years ago
-
### What happened?
It is not possible to update the Aqara double key wired wall switch without neutral wire (lumi.ctrl_neutral2) aka qbkg03lm via OTA
Error: Failed to check if update available f…
-
### What happened?
If I try to set the Power-On enum behaviour via Zigbee2Mqtt, I get the following error:
Publish 'set' 'power_outage_memory' to 'Attic 1' failed: 'Error: Write 0xa4c138e0d51c2b85…
-
Hi, i am becoming crazy. My Sonoff dongle v2 E is not working fine. I tryed it with proxmox and a home assistant instance on a vm, but the sonoff seems that after a while goes offline. And change the …
-
I have a PN532 module plugged in HSU (UART) mode with a usb serial adapter.
Using `nfc-poll -v` and scanning various RFID cards and tags works flawlessly, but trying to scan a `YubiKey 5 NFC` doesn'…
-
This is essentially uploading a file from the editor to the display from an SD card on the Arduino.
This should also be able to work from anything that can provide buffered data (e.g. network, blueto…