-
### Discussed in https://github.com/syssi/esphome-jk-bms/discussions/12
Originally posted by **inorhan** October 28, 2021
Doesn't work with JK-B2A24S20P HW 8.X SW 8.1.2H version 3.7.1 Manuf …
syssi updated
2 years ago
-
I am guessing that JKBMS JK-B2A24S20P version 4.3.4
Hardware Ver 10-.x-W
I am guessing that the new version of the JKBMS is not currently supported I have tried to communicate with it over Blueto…
-
i think it would be better to have a start balance voltage, deviation start and deviation stop option.
if one cell exceed the start balance voltage and the deviation it get balanced untill the deviat…
-
Qq: I have 3 bmsses connected to the same rs485. Any thoughts on how to address them individually? Love the script!
-
```
aa:55:90:eb:2a:04:00:00:00:00:11:9d:1b:c4:c1:a5:85:91:a9:5a
aa:55:90:eb:2a:04:01:00:00:00:c2:a9:65:de:02:7f:42:c3:c3:a0
```
```
RS485/CAN
-1 01 01 00 01 01
282 08 08 00 08 08
syssi updated
9 months ago
-
I have JKBMS with successfully connected RS485 to USB Serial converter. This usb device is visible on HA as device `/dev/ttyUSB0`.
Is it possible to use this connection instead of Bluetooth? I might …
-
Hallo shining-man,
BT Verbindung mit JK-BMS funktioniert bei mir sehr gut. Vielen Dank dafür.
Jetzt würde ich mir wünschen,das ich auch noch meinen Wechselrichter anschließen kann.
Ich habe einen …
-
Hi,
I have configured this JK_B2A24S15P but i'm getting this errors, any idea?:
`python3 main.py …
-
Using 2 x JK-PB via RS485 (mode 2)
Using Victron Cerbo GX + 2xMultiplus II (in parallel)
```
[20:38:30][I][canbus:717]: send can_id: 0x377 [ASCII] Max temperature sensor ID : 102
[20:38:30][I][c…
-
if the config looks like this:
```
[JKBMS_UNTEN]
type=jkbms
protocol=jk04
port=C8:47:8C:E5:CC:9F
command=getCellData
outputs=screen
[JKBMS_BOX1_UNTEN]
type=jkbms
protocol=jkv11
port=C8…