-
**Describe the bug**
test_isr_offload_job_multiple cause hard fault
**To Reproduce**
Steps to reproduce the behavior:
1. cd tests/kernel/interrupt ;mkdir build; cd build
2. cmake -DBOARD=frdm…
-
- [x] frdm_k22f
- [x] frdm_k64f
- [x] frdm_k82f
- [x] frdm_kl25z
- [x] frdm_kw41z: need to understand what's going on w/ TPM/PWM
- [x] hexiwear_k64
- [x] hexiwear_kw40z: requires had coded pin d…
galak updated
3 years ago
-
**Describe the bug**
uart port has no output, bisect found the issue is related to commit fbfd75e19ab7dce9c0fd38c1b215dd1b2512734e
**To Reproduce**
Steps to reproduce the behavior:
1. mkdir buil…
-
Reading works all the time but writing fails every now and then, it would freeze up and linux will try to reset it.
>kernel: usb 3-10: reset full-speed USB device number 20 using xhci_hcd
The ex…
-
### Description of defect
After compilation of my c++ code after trying to upload to the device I get the error `PyOCD deploy failed, deploying using mass storage device...`
It started happening…
-
### Description of defect
Mbed OS 6 has enabled the bare-metal profile for a few targets, but not all of them (details in targets.json)
Developers are trying to use the [mbed-os-example-…
-
**Set up**
Provide details of your setup help us to reproduce the issue as quick as possible
- **PC OS** : Windows 10
- **Board** : -
- **Firmware**: examples/device/cdc_msc
**Descri…
-
LED needs to be configured:
* The front 8-10 Yellow LED’s must be in a Running Mode (1 LED at a time) whenever the robot is moving (in any direction).
* The front 8-10 Yellow LED’s must all be li…
-
Create functions to control the 4 wheels using 8 PWM Pins. The `PWM.h` and `PWM.c` header files can be used to initialise the pins needed. The robot must
* be able to move in all FOUR directions, F…
-
A. BT Connectivity
Requirements
1. Develop a User Interface Button to establish BT connectivity with the Robot
2. Robot must respond with TWO LED Flashes at the Front (Green LED’s) to indicate tha…