-
http://3dprintboard.com/showthread.php?15326-Qidi-Tech-1-Replicator-2-clone&p=94492&viewfull=1#post94492
Please refer to the link above, and read through a few pages of posts. I have been suffering f…
-
Looking at the .cpp file, there this:
`uint8_t XNucleoIHM02A1::number_of_boards = 0;`
Does each "ACTION" in the .cpp file need to have an addition? And does a new initializer need to be created in…
-
## Introduction
Zephyr at present does not have a provision to control stepper motors. **Stepper Motor Controllers** do have a set of common functions which can be bundled together in a API as pres…
-
Hello,
I am using your examples angle.ino but I got an error using
L6480Stepper stepper(pinCS); // pass CS pin number
here the error
Arduino: 1.8.13 (Windows 10), Board: "Arduino MKRZERO"
Steppe…
-
I have been compiling Marlin firmware for a long time with the arduino IDE right up until the last version 2.0.5, but since the new version 2.0.6 I am now getting a filename or extension is too long …
-
What kind of issue is this? **PlatformIO Core**.
I am running a CI/CD workflow on github actions, which installs (the most recent version of) PlatformIO.
After the upgrade to 6.1.12, this install…
-
From https://github.com/rust-lang/crates.io-index/pull/11#issuecomment-400916853:
> I'm not sure how version 0.1.1 showed up, but it's not on crates.io web (crates.io/crates/linux_l6470) and the do…
-
I'v got an BIGTREETECH SKR 1.4 Turbo connected to the TFT 35 V2 using the RS232 Port on the TFT and the TFT port on the board. Updated the screens firmware, set the baudrate @ 250000 on both Marlin (o…
-
- [x] Implement a new device MCP3424 -> [https://www.abelectronics.co.uk/p/69/adc-pi-raspberry-pi-analogue-to-digital-converter](https://www.abelectronics.co.uk/p/69/adc-pi-raspberry-pi-analogue-to-di…
-
What kind of issue is this?
- [ X] **PlatformIO Core**.
If you’ve found a bug, please provide an information below.
*You can erase any parts of this template not applicable to your Issu…