-
After changing to camera-streamer & webrtc option in Crowsnest v4, the webcam is unable to load in Octoeverwhere. Webcam work fine in Mainsail itself
-
Having some weird power-up issues now when the printer sits for awhile the mainsail won't connect any more, and when I go to power-cycle the steppers are buzzing on the start-up for awhile before sett…
-
### Requested feature:
As per my admittedly limited understanding: Within Docker containers, processes run as root by default, but Docker allows for running in-container processes as a less privilege…
-
### Requested feature:
Implement customizable scaling of the dedicated "Webcam" view:
- Scale to browser width
- Scale to browser height
- 1:1
### Solves the following problem:
In Mainsail v.2…
-
Hi there!
I was trying to use your created printer.cfg with the Sonic Pad. After removing the Line:
[include mainsail.cfg]
the file could be imported into the pad and also the connection worked. …
-
### What happened
I have a TPLink Smartplug HS110 that powers the printers as well as the Raspberry which runs Mainsail/moonraker/Klipper.
Mainsail is v2.1.1
moonraker (v0.7.1-365-g9be93ff)
Klippe…
-
Hello, I am partway through completing my own conversion with Mainsail working and most of the wires ready. I was wondering if you would be able to send an image of your wiring specifically of the mot…
-
# Must-have Mainsail, Klipper and Cura slicer configuration with Artillery Sidewinder X2 | freakyDude's Blog
Tutorial about the must-have Mainsail, Klipper and Cura slicer configuration files with …
-
Installing the timelapse component in mainsail for Moonraker is not the easiest thing for everyone.
It would be nice to have an option in Kiauh to automatically install the timelapse component and…
-
Hi,
I updated Raspbian 10 (buster) to Raspbian 11 (bullseye), for crowsnest compatibilities issues. But now Klipper is unable to connect to can mcu.
I'am using a RPi 3B, an octopus v1.1 (STM32F446…