-
I am using the MKS TFT32 + WiFi module, Cura 4.4 + MKS wifi plugin. https://github.com/makerbase-mks/mks-wifi-plugin. Deleting files on the SD card does not work.
-
i have take configuration.h and configuration_adv.h here : https://github.com/makerbase-mks/MKS-Robin/tree/master/MKS%20Robin/firmware/Marlin2.0-MKS-Robin/Marlin
i usesource and tuto
platformio.ini …
-
I am using mks tft35 v1 and mks genl v2.1 product with marlin software. Even though I think I did everything right, I still can't print from the SD card or USB. When I enter the print screen, the temp…
-
Let's use this ticket to capture an SEO-related checklist of small improvements:
- [ ] Add noindex to front page and search results page and explore page
- [x] Set rel=canonical URL tags on maker, pro…
-
Hi all,
I'll post here since there is not much activity in the Robin2 repo. First issue is that even though wifi appears configured correctly for connecting to my router, it dows not. It revert to AP…
-
Hello,
I try these drivers with GRBL on Arduino UNO and all four drivers can spin motor but when I try with ESP32 only two drivers TB6560 and Black driver can spin motor.
Best Regards,
##…
-
Hey,
because i want to use the Daly BMS via CAN i ordered a Makerbase CANable USB Stick and implemented your library with CAN.
I put the files here: https://gist.github.com/derlucas/d548562492db96…
-
I know about this problem https://github.com/makerbase-mks/MKS-Robin-E3-E3D/issues/101, I installed the right file, Robin_e3.bin from .pio/build/mks_robin_e3, but I still have this problem with both s…
-
I have the fan connected to PC14 "FAN1" on the board. In `pins_MKS_ROBIN_NANO_V3_common.h` FAN_PIN is set to PC14.
The part cooling fan does not move when set between 0-49%, then it runs at full …
-
any one can help am use mks tinybee on kossel linear plus
tmc2209 x4
am test all config in Marlin 2.0.9.2 have bug layershift it jump when print long 15cm + layer have shift any one can help fix thi…