-
Hi!
Great library, i was wondering is the PR-003 also supported? Where i live the other versions are really hard to get and this is the only one available.
Thanks.
-
I'm using an Octopus Max with the EZ31865 designed for it. With the EZ31865 on Motor8 slot connected to a PT1000 and everything configured correctly in klipper it works just fine and reports the corre…
-
Do you have a wiring diagram/ scheme for the electronics part?
The software side is simple for me to understand, but the hardware side I'm not so sure on
-
The MAX31865 takes a reference resistor ratio as a `Rational32`, which I assume is the reference resistor value (e.g. 4.3k) against the RTD reference (e.g. 1k for a PT1000). My assumption might be inc…
-
Will you be adding the multi threading still to this code? I am trying to build something similar but have not been able to get it to multi thread correctly with Kivy.
-
> I have no idea if its working I have added everything I think.
#####################################################################
# A/B Steppers https://github.com/bigtreetech/Manta-M5P/blob/…
-
What is the pitch of the Pin Header Jumper Cap for the EBB36 and EBB42 boards?
My box spilled and I lost all the jumper caps. I need to order a replacement jumper caps but the jumper caps for the EB…
-
### Is your feature request related to a problem? Please describe
I am using the BTT EBB42 1.2 toolboard and measuring the hotend temperature using the integrated MAX31865. I run the configure wizard…
-
Hi
I am getting
**Unable to write tmc spi 'stepper_x' register GLOBALSCALER**
error when I try to home steppers on SKR 3 EZ, using EZ5160 drivers
below is my printer.cfg config, pretty standard…
-
I failed to build the firmware downloaded from here after i upgrad PlatformIO to the latest version (Core 6.1.3).
It seems that the build-in library of ESP32 cannot be read correctly.
Please help.…
25879 updated
2 years ago