-
Adding a loop does not record/overdub to the new loop, always at Loop 0.
Loop volume is significantly lower than original audio. Tried all settings within the looper modules and it didn't change.
…
-
First a question if I understood it correctly. Since I'll seen that the 'Teensy-USB-MIDI-name.py' contains various XT names I understood that an individual Arduino can act as various separate interfac…
-
In the UART mode menu, you can pick MIDI or PPP but not both, even though neither necessarily conflict. It would be useful to be able to enable both MIDI and networking at the same time. Perhaps the e…
-
The deluge can distinguish between midi ports in both host and device mode but can only configure the ports in device mode. There should be menu entries to allow configuring MPE ranges for hosted mult…
-
Olá amigo ...
[Control Surface ](https://github.com/tttapa/Control-Surface) é compatível com MEGA 2560?
Seu projeto, tem algum custo, caso eu queira usar?
Obrigado ...
-
Please make it possible to output 14-bit midi over USB.
I don't need [NRPN](https://en.wikipedia.org/wiki/NRPN), only the "fine adjustment" allready in the conventional MIDI controller specifi…
-
Some expanders from popular manufacturers (At least Roland, Yamaha & Korg. Maybe others.) released in the mid-90's support MIDI over serial port on a mini-DIN 8 connector.
This feature allows more …
-
(Ported from the Roadmap section of the documentation to an issue per #269)
Originally written by @olemb:
See: https://github.com/mido/mido-native-backends
-
Hello,
Apologies if this is the wrong place to be asking for support help.
I've posted my issue in (hopefully) great detail here: https://forum.arduino.cc/t/usb-midi-communication-error/874461…
ghost updated
3 years ago
-
Hello,
I came across your ESP32 synth project and got interested on it. It is really great and works pretty well. Actually I added USB MIDI support by using a usb host mini shield. So right now I w…