-
There seems to be an offset of 2 in the address, at least with the 32bit data with Modbus TCP (I can only test the Modbus on a machine that only uses 32bit data: long int, or float32).
The get the…
-
Hi
I am a noob and not sure how to get your code into the esp32. Is there any documentation on how I can do the installation on the esp as well as what the pinout is for the esp to ttl please. I woul…
-
Hi. looks promising.
Is this able to decrypt encrypted modbus? (my older pv unit is one of the unlucky units when sungrow was playing with encryption)
I currently use sungather (is this built on t…
-
Can an example program for Modbus TCP ---> Modbus ASCII be added?
-
@budulinek
You mention in your ReadMe
> There is no external Modbus adapter for newer Altherma models, the official LAN adapter is very limited in functionality and as of today Daikin has no usab…
-
### Which node-red-contrib-modbus version are you using?
/home/gene/nodejs/userDir1881
### What happened?
using modbus server ,
inject data from input , with funcion content:
msg.payload…
-
### Which node-red-contrib-modbus version are you using?
5.31.0
### What happened?
node stop poll rate when after 5 day running in sever
### Server
Modbus-Server Node
### How can this be reprod…
-
Hello,
thanks for these great library.
As I´m not into python very much, I haven´t found the solution myself.
I want to read only single sensors (i.e. "ppv" or "active_power_total") as I normal…
-
Hi, any ideas what other devices than `/dev/usb/hiddev0` would need to be handed over to the container when trying to use modbus?
I am constantly getting `COMMLOST` when running in docker. If I insta…
-
### What happened?
modbus rtu over serial port will not work correct because the serial may be not write all data to the pc(or memory?), due to this, if read serial port immediately after send comman…