-
Create a GUI to configurate the Controller via USB/Gui
-
Hi, When I try to run the module I get this error message. "'module' has no method MPU". When trying to call the "mpu = mpu6050.MPU()" (main.py line 11)
I tried creating my own file with a class an…
-
I've been working on a fork of this repo that adds support for the MPU6050 and MPU6000. This means I have had to add an `Interface` trait implemented by I2C and SPI so that the library can work with b…
-
I struggle to make the library working with 2 modules.
At the startup of my application, sometime it's working, sometime not, or it's simply hanging.
Then i realized it seems that in the `begin()`…
-
There is no example of using magnetometer sensor. Also it will be good to see example of getting some data, like roll, pitch, yaw angles
ghost updated
4 years ago
-
**_Reported by Andrew Boie:_**
We need to get the MPU up and running on Xtensa. Select an appropriate CPU design that has an MPU built in that we can run in either the xt-sim simulator or the Xtensa …
-
Hello
I have an esp32 from HiLetgo. I also have an MPU 9255. I want to know if the following log shows a working 9255. I mostly left it still on the table.
https://nopaste.xyz/?35c2cef5d570a4f6#…
-
Hi Kris
I have a problem. I have read your all comment. But ı havent solved my problem.
I calibrated my all sensor (Accel, gyro and mag). I get 9 data very well. Although I apply all your formula, I…
-
/\* MPU9250 Basic Example Code
by: Kris Winer
date: April 1, 2014
license: Beerware - Use this code however you'd like. If you
find it useful you can buy me a beer some time.
Demonstrate basic …
-
hi Kriswiner,
I saw your programs about the MPU 9250 modul. They are very coplex congatulation.
I started to understand your code, and make it a bit simplier to me. I just need to get the three Eule…