-
I'm having a problem where everything works fine using the older crazyflie firmware, 2019.09, but when I update my firmware to 2020.02, I get this error:
`[ INFO] [1583189498.507758262]: Requesting L…
-
Hi Kris,
I am currently using LSM9DS1 together with a SparkFun Arduino Pro Micro 3.3V 8MHz board to extract data from the sensor, and feed the data serially via SPI / USB connection to a Processing s…
-
ID: "db50e483-4c0e-47b8-b33d-fe6733a6c20c"
-
Hi.
I was wondering if you had made any comparison on these 3 chips, especially in terms of the magnetometer, which has been a big problem for me on the Invensense in terms of error.
-
Hi
I have a question about how to filter mpu9250 data. I read the raw data of the sensor, but I had trouble getting Quaternion. The output q is unstable at all, and the data of the roll, pitch, and…
29676 updated
2 years ago
-
**Describe the bug**
lsm303d & l3gd20 can not be calibrate leveled in single calibration process.
This issue should infect all FCUs have these 2 sensors onboard (>= v1.10).
This issue can only be v…
-
Hello all
I have a chinese board with RK3188 and I tried to build and use this kernel with Radxa Rock device tree. Unfortunately the boot process stops after a few seconds and it doesn't go on. Here …
-
**Describe the bug**
Two problems.
1. In desktop appimage, latest version (218.240305.0 (Desktop)), I get the error when attempting to sign in, "The connection to the server was lost, please try aga…
-
Hello, I tried running the wom interrupt example code but i'm not getting the expected output. The loop is printing the readings correctly but whenever there is a motion the "Interrupt type: motion" i…
-
Hello
Firts of all, thanks for sharing rhis project! 😉
Everytime i compile your quadcopter.ino file example with any of the IMU_SPI , it compiles correctly , i export the compiled binary in uf2,…