-
Flashing newest firmware is done well using command "sudo python esptool.py --port /dev/ttyUSB0 write_flash 0x00000 ./nodemcu_latest.bin"
after that, i launch ESPlorer using command "sudo ./ESPlorer…
-
Hi @bartbutenaers
I don't know if you work on this project, but maybe you could advice me.
I want to measure time between two messages but in that specific way.
A msg with payload 1 always start…
-
i program the esp8266 esp-07 but it resets many times and randomly! the node mcu board works about 117 hours but the esp-07 works about 23 hours and then it resets what is the problem?????
-
# Detailed Description
I use `rmw_uros_sync_session()` to sync time with Micro-ROS-Agent. But when I use `rmw_uros_epoch_millis()` and `rmw_uros_epoch_nanos()` to get time, I got seconds starting f…
-
### Is there an existing core-v-mcu bug for this?
- [X] I have searched the existing bug issues
### Bug Description
To do simulation using verilator and gtkwave
we are trying to "build verilator m…
-
Doge WebUI for demo nodeCtrl shows LQEs of 0 or 1 with HW nodes
-
I am getting compilation errors. which I have attached. I am compiling using Arduino IDE v2.0. and esp8266\3.1.0. The board is Node MCU V1.0 ESP 12E module.
[TrainAccess Compilation errors.txt](https…
-
Hi , I flashed "Tinker_Board-Debian-Buster-v3.0.11-20211026" image in tinker board S R2.0 , after power on by 5v /3A supply ,board is not booting , after starting kernel many failed logs are coming. …
-
Hello!!!
I have one wemos mini d1 and a node Mcu v3 conect to home assistance working normal, but in Hoobs only show one devide.
please can you help me with de code example using two or more devices…
-
## Issue template
- Hardware description:
- laptop Ryzen7 with 16Gig RAM, Ubuntu Jammy
- RTOS:
- VScode with Platformio
- Installation type:
- Attempting to install publisher example script…