-
Hi,
Great software!
I noticed when using an ESP32-S3 32MB flash and 8MB RAM, the system information says SPIRAM available no, should that be yes?
-
Using ESP32-S3-WROOM-1 ( N16R8 )
Changed PSRAM to octal as per install instructions
Compiled and loaded without issues
on boot:
ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0x1 (POWERON),boot:…
-
Hello, just tested the web installer with release 0.14.2 on Lolin s3 mini
The installer does its thing but the board does not boot wled afterwards.
The serial loops with these messages
ESP-ROM:es…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have up…
-
I own a N16R8 version for example
```ini
; change flashsize
board_upload.flash_size = 16MB
board_build.partitions = default_16MB.csv
```
It seems to work. Although pio seems to think that the am…
-
Hi, can you please add support for the waveshare mini.
URL: https://www.waveshare.com/esp32-s3-zero.htm
Thanks
-
After reset of CPU logo appears on the LCD /ILI9341/, on the monitor there is:
ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0x1 (POWERON),boot:0x8 (SPI_FAST_FLASH_BOOT)
SPIWP:0xee
mode:DIO, c…
-
Hi, there are some errors in the 12C examples, for the I2C scanner the OF version is actually without OF and throws, no rule to make target run
The straight 12c examples bails on the make.
I am …
-
This is the display I am using.
https://www.buydisplay.com/spi-1280x400-7-84-inch-ips-tft-lcd-module-optl-capacitive-touch
Any assistance or advise would be greatly appreciated
-
The current SPI API `drivers/spi.h` allows to advertise Dual and Quad SPI support via `SPI_LINES_DUAL` and `SPI_LINES_QUAD`, but it does not provide needed means to tag direction of the each transfer …