-
i see there is at least some preliminary support for eyetoy in the code even if it isn't active. is there plans to make that available?
-
Change selection of Speaker/Mic during Installation / Settings to pick from Name instead of manually typing the card & decide Ids.
Thanks to @guillaumef
>Using the card name is more reliable than…
-
I would like to improve image quality from ov2640 camera with 120 deg lens, which do not match default correction.
The only information I found on this topic is description in ov3640 datasheet:
ht…
-
Hi,
I've found this project on reddit and was excited to try it. I am using a Sony Playstation Eye cam.
from `lsusb`: `Bus 003 Device 006: ID 1415:2000 Nam Tai E&E Products Ltd. or OmniVision Te…
-
Great streamer!
I managed to make it work for the widespread older RPI v1.3 camera. Adjustments of your example:
**camera-streamer-pi5647-5MP.service**
```
; Official Raspberry Pi v1.3 5MP cam…
bb5d0 updated
4 months ago
-
First, Let me apologize if I'm placing this issue in the wrong area.
I'm using an M5Stack Timer Camera, Arduino IDE and the standard camera software. I'm having problems w/ the brightness and cont…
-
Pouvoir faire fonctionner Jarvis avec Alsa mais également PulseAudio.
PulseAudio nous permet d'être connecté avec une enceinte bluetooth, car malheureusement bluez5 n'est pas compatible avec Alsa, …
-
I did several test runs on the car in open areas and the private sector. Moving in the private sector does not cause problems, except for the periodic distortion of the camera's roll orientation on a …
-
Made a branch for updating the readme
Atm I have mostly removed any obsolete information (ie c states problem) and currently waiting for 4.8 to proceed.
-
`G:\arduino-1.8.13\portable\sketchbook\esp32-cam_ov2640-timelapse\esp32-cam_ov2640-timelapse.ino: In function 'void setup()':
esp32-cam_ov2640-timelapse:166:7: error: 'sensor_t {aka struct _sensor}' …