-
Hoi,
With OTMONITOR, trying to upgrade firmware from 4.2.5. to 4.3.
Connecting to the gateway is succesfull, I see values in the monitor
It doesn't work: it showes message "firmware upgrade fai…
-
In addition to issue #222
As I still had disconnect connect in Domoticz log file I removed the software and went back to the original software with just serial connection. From that moment all worked…
-
### The problem
Hello,
I see the following report in the log while OpenTherm gateway is trying to communicate to the HW, when setting are read or write.
During this all OpenTherm's sensors became "…
-
Upgraded firmware to 0.10.2 (from 0.9.5 IIRC) using files found here: https://github.com/rvdbreemen/OTGW-firmware/releases/tag/v0.10.2 , and using both ino.bin and littlefs.bin files (sequentially, in…
-
### The problem
HA logviewer output:
> File "/usr/src/homeassistant/homeassistant/util/async_.py", line 139, in check_loop
> raise RuntimeError(
> RuntimeError: Detected blocking call to …
-
I never see anything on `otgw/value/otgw/RelModLevel` (and I have multiple days of all output recording).
I do see it in http://otgw.local/api/v1/otgw/otmonitor/:
```json{"otmonitor":[
{"name":…
tino updated
5 months ago
-
**Describe the problem you have/What new integration you would like**
It would be great if ESPHome would support opentherm and directly integrate into Home Assistant
**Please describe your u…
-
Since upgrading to v1, my NodeMCU ESP8266 crashes after running the API for a few hours.
The blue LED also turns off.
I can remove power and restore it, then the NodeMCU boots and the API works ag…
-
Hi,
After rebooting my NAS with HA and Domoticz in docker containers, both HA and DOM do not accept the MQTT messages of the firmware anymore.
Only a hard restart of the firmware makes both HA and…
-
Domoticz Log gives multiple random "Connection reset!" messages.
![Domoticz-Log](https://github.com/rvdbreemen/OTGW-firmware/assets/31951195/0180c833-2e88-4935-8388-5f9d5edc2c35)
Not sure what the…
0crap updated
5 months ago