-
_This is a bug that has the risk of burning the user
* **I have**
- [X] Searched previous issues
- [X] This is in _this_ firmware, not vendor "offical" firmware
- [ ] This is not a bug in…
-
Just wanted to make sure you know that a linux version of the updater would be highly appreciated.
Thanks for your work.
myxor updated
3 years ago
-
**To Reproduce**
Steps to reproduce the behaviour:
1. Turn on heater on Pinecil
2. Use Pinecil interface to adjust temp clicking repeatedly
**Expected behaviour**
Temperature to only jump by th…
-
### The problem
I was able to set up the IronOS integration with my Pinecil V2 (thanks!).
However, I think that most would agree that this isn't a device that would/should be powered constantly.
Wh…
-
Please edit this template and fill out all the information you can (where relevant). Failure to provide essential information can delay the response you receive.
_This is a [Question]_
* **I hav…
-
this ticket is for Mr. Potato. he wants to know if there could be 2 decimals for the calibrate volts.
right now it showsonly one decimal spot like 20.1v but since the fluctuations are slow he d…
-
After selecting a custom dfu file, the app immediately closes when I press the update button, without any messages.
-
**Describe error.**
My TS80 is stuck at 5V using build 2.20. It will report 9V immediately after being plugged in, but after 1 second to 5 minutes it will drop to 5v and get stuck there.
**For rep…
-
I've built 3 tips with thermocouples hard-soldered/brazed to the end (670C melting point): https://youtu.be/oAAN9YCJlkc
I've got a miniware D24, a generic B2 tip and a Hakko T15-D2.
Here's my "l…
-
For whatever reason, pineflash will lock up using one single core completely each time I try to start up the AppImage file.
I've forked the project and compiled it myself and the UI now opens fine.…