-
Nella Tab "Telefonia" è indicato **"acount"** invece di **"account"** o **"accounts"**
Nella Tab "Estensioni"
- Il titolo è "Elenco **epplicazioni**" invece del corretto "Elenco applicazioni"
- …
-
Hi David,
As said in gabstopper/ansible-stonesoft#34, I think something is broked in VPN endpoint management.
```
In [109]: f1 = Engine('110') …
-
Hi David,
I need to manage `switch_physical_interface` and `port_group_interface` with Ansible (NGFW-110)
`engine_facts` playbook give the configuration of the firewall:
```
TASK [debug] ***…
-
Device Model: TG789vac v2
Gui Version: 8.10.72 2018
In "IP Extras" card DNS settings seem to be not editable. Is this because the device is not connected to internet?
-
I think
1. Speed nob should be set ( 53 * 8 )bits * n. Now , kbit per seconds.( tc htb uses 1k=1000 )
2. Fq_codel Target calculation should depends on MTU includes whole cell size . For example , C…
-
Device Model: tg800vac firmware 16.3
GUI Version [ 8.9.25 ] 2018
Description of problem: I cannot connect over ADSL with PPPoA+VC-MUX or PPPoE+LLC in IPV4, DSLAM in ATM. I do not care abou…
-
On LEDE 17.01.4 I seem to be getting:
```
Failed to send DHCPV6 message to ff02::1:2 (Address not available)
```
trying to get a DHCPv6 lease from my provider.
This is the same configuratio…
-
*lynxis:*
based on the thread
[LEDE-DEV] [OpenWrt-Devel] latency on PPPoA ADSL Annex A on using Lantiq
http://lists.infradead.org/pipermail/lede-dev/2016-August/002138.html
When using ssh ont…
-
*ezplanet:*
Supply the following if possible:
- Device problem occurs on: BT Home Hub 5
- Software versions: OpenWrt SNAPSHOT, r7050-9c409cb
- Steps to reproduce configure ADSL PPPoA, ADSL will…
-
Device Model: TG789vac V2
Gui Version: 8.8.55 STABLE
Description of problem:
in network file config option:
option ifname 'ptm0'
option proto 'dhcp'
at every reboot become:
option ifname…